联系我们
+
  • 纤维分离机 (9)(1706165676335).jpg
  • 纤维分离机 (5).jpg
  • 纤维分离机 (6).jpg
  • 纤维分离机 (7).jpg
  • 纤维分离机 (2).jpg

Fiber Separator


Key words:

Fiber Separator


Classification:


Attachment


The conical fiber separator is a kind of waste paper dealing equipment, which uses the difference in the specific gravity between waste paper pulp and impurities to remove the light and heavy in the waste paper raw materials. The particle treatment has the function of dissolving and removing the heavy. In the case of tiny low power consumption, less fiber shedding, and less spreading, the waste paper is broken into fibers, and the debris (sand, nails, plastic film, cotton yarn, grass clippings, etc.) is removed.


Message

Detailed introduction

Fiber separator is divided into cylindrical fiber separator and conical fiber separator.
Fiber separator is a kind of waste paper processing equipment, which uses the specific gravity difference between waste paper pulp and impurities to remove the light and heavy particles in the waste paper raw material, and the treatment has the function of dissolving and removing heavy materials. With minimal power consumption, less fiber shedding and less spreading, it crushes waste paper into fibers and removes impurities (sand, nails, plastic film, cotton yarn, grass clippings, etc.).
1.The barrel adopts wear resistance and pressure resistance standards design, and the material is stainless steel or carbon steel. The pulp enters the cylinder along the tangential direction from the inlet, the raw material is broken up by the centrifugal force generated by the high-speed rotation of the rotor, and the light and heavy impurities are separated. The light impurities are discharged from the center of the simplified gland. Enter the sand tank and discharge.
2.The rotor is designed with a special shape, which can effectively separate light and heavy impurities.
The inner side of the rotor is equipped with a cleaning water pipe to prevent the sieve from being blocked.
The rotor blade is made of replaceable wear-resistant high-strength alloy steel.
The rotor body is cast steel or stainless steel (user chooses).
3.The aperture of the screen plate is 2.5~6φmm (selected according to user needs)
Usually newsprint and magazines are used in the range of 2.5mm~4mm
Corrugated paper and cardboard paper are used in the range of 3.5mm~6mm
The screen plate is assembled in pieces, which is easy and simple to replace the screen plate.
4.The frame is used to support the main shaft and the pulp inlet pipe. The upper part is supported by the rotor and the drive shaft by 2 bearings. The gap between the rotor and the screen plate is adjustable.
5.The main part is made of stainless steel and supported by the barrel.
The switch of the operation panel is automatically controlled, and 2 cleaning pressure water injection ports are attached.

Technical Parameters:

Product Name Fiber separator
Type ZDF22
Impeller diameter(mm) φ650
Treatment concentration(%) 2.5-4.0
Pulp inlet pressure(Mpa) 0.15-0.25
Motor powerKW 37
Control type Manual
ONP and local OCC screen plateφ2.5-φ4 45-65t/d
ONP and local OCC screen plateφ4-φ5 65-85t/d
AOCC screen plateφ2.5-φ4 35-55t/d
AOCC screen plateφ4-φ5 55-75t/d
  • Related products
Qinyang No.1 Paper Machinery Co.,Ltd
  • Messsage

Look forward to your message

Qinyang No.1 Paper Machinery Co.,Ltd

We will reply as soon as possible

%{tishi_zhanwei}%