联系我们
+
  • 高浓除渣器 (31)(1706166208292).jpg
  • 高浓除渣器 (5).jpg
  • 高浓除渣器 (20).jpg
  • 高浓除渣器 (9).jpg
  • 高浓除渣器 (36).jpg

High Density Cleaner


Key words:

High Density Cleaner


Classification:


Attachment


High density cleaner for paper pulp machine mainly applied to remove all kinds of heavy impurities in paper pulp,like staples,stone,glasses,etc.Volute pulp inflow chamber,the eddy ability is strong and low pressure area subarea is obvious.This makes accepts and impurities separate thoroughly. Wear resistance ceramics cone,long service life.Specially designed long cone has small taper angle and fine cleaning efficiency.Equipment with PLC control cabinet,convenient and easy to control,sufficiently discharge impurities.


Message

Detailed introduction

The high density desludger is mainly suitable for removing all kinds of heavy impurities in the pulp, such as nails, stones, glass and so on. Vortex-type pulp feed chamber with strong vortex capacity and obvious low-pressure differentiation area makes the separation of impurities and impurities thorough. Wear-resistant ceramic cone, long service life. Special designed long cone, small cone angle, high cleaning efficiency. The equipment adopts PLC control cabinet, which is convenient and easy to control, and can fully discharge the impurities.
Highly concentrated desludger is to use the different specific gravity of fiber and impurities to separate impurities. Slurry with a certain pressure from the feed tee tangent into the slag remover after high-speed rotation, due to the difference in centrifugal force, the heavy impurities are thrown to the wall, under the action of gravity, gradually run to the bottom of the cone, into the sedimentation tank. Fiber due to the smaller centrifugal force, gradually run to the center of the low-pressure area, after reaching the bottom of the vortex rise, and finally discharged by the mouth of the good pulp. The cone of the high-density slag remover has a certain
Cone has a certain degree of taper, and the cone is longer, the radius of rotation of the pulp in the cone is gradually reduced, to avoid the speed of the pulp flow in the process of rotation is reduced to ensure that the centrifugal force is strengthened, thus improving the purification efficiency of the paper material. The bottom balance water pressure is slightly greater than the pulp pressure, so that the fiber can not enter the slag tank, only sand, metal particles, glue blocks, plastics and other heavy impurities sink into the tank, reducing fiber loss. The use of fibers and impurities with different specific gravity, the use of centrifugal principle to make heavy impurities from the pulp separation, to achieve the purpose of purifying the pulp. The dregs remover covers a small area, large production capacity, automated adjustable dregs discharge operation is simple, not easy to block the dregs discharge port, high purification efficiency, fiber loss is small. It can be processed in one stage or two stages. Cone wear-resistant, long service life; no transmission, no need for more maintenance. There are two forms of fully automatic and manual.

Technical Parameter:

Name High Density Cleaner
Type ATZSC2 ATZSC3 ATZSC4 ATZSC5 ATZSC6 ATZSC7
Throughput(l/min) 900-1400 1800-2600 3000-4500 4500-5800 5800-7500 8000-12000
Concentration of input pulp(%) 2月5日
Pressure of input pulp(mpa) 0.15-0.35
Pressure of output pulp (mpa) 0.1-0.25
Pressure of backwash water(mpa) Pressure of input pulp+0.02Mpa

 

  • Related products
Qinyang No.1 Paper Machinery Co.,Ltd
  • Messsage

Look forward to your message

Qinyang No.1 Paper Machinery Co.,Ltd

We will reply as soon as possible

%{tishi_zhanwei}%